4002207 Ag Leader SureVac

Description

The Ag Leader SureVac stops planting by shutting off vacuum to the top (12 oclock position) of the seed disk. Planting resumes when SureVac restores vacuum to the top of the seed disk. If disks are warped or worn, they should be replaced upon initial installation of SureVac Disk should be in NEW or near NEW condition for optimum performance of SureVac 40 Cell ProMax Seed Disks / eSets for corn are not supported by SureVac Depending on planter configuration, (1) or more SureVac covers will need to be drilled out to accommodate a vacuum pressure hose fitting SureVac assemblies have been proven effective at the manufacturers recommended vacuum levels. A retractable electric solenoid is connected to a friction pad on the inside of the lid. When power is supplied, the friction pad contacts the seed-meter disc and interrupts the vacuum pressure at the top of the disc, thereby releasing the seed back in to the reservoir instead of the seed tube. When power is removed, the friction pad retracts from the seed disc, and full vacuum is restored. This is important to know, because if there is an electrical fault, then the meter defaults to always planting, so that you can always be planting, too. SureVacs require the SeedCommand planter application with the Ag Leader display to operate. However, because each SureVac has only two wires, third-party controllers can also control the SureVacs.